How To Clean Filter On Ge Nautilus Dishwasher

GE Nautilus Congenital-In Dishwasher Command Settings

1.Cycles

POTS & PANS/HEAVY WASH

For heavily soiled dishes or cookware with dried-on or broiled-on soils. Everyday dishes may exist included. This bicycle volition not remove burned-on foods.

(on some models)

NORMAL/NORMAL WASH

For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than NORMAL Launder will save free energy and h2o.

SHORT Wash

For quickly washing loads of everyday dishes with medium soils that have not stale on, such as loads consisting mostly of glasses.

WATER SAVER LIGHT WASH

For dishes with calorie-free soils.

(on some models)

RINSE ONLY

For rinsing partial loads that will be washed later. Do not apply detergent.

DRYING PLATE WARMER

For warming clean dishes and serving plates. This cycle will take approximately thirty minutes.

HOT PREWASH HOT START

Preheats wash h2o to the correct temperature.

CHINA CRYSTAL

For lightly soiled cathay and crystal.

(on some models)

2.Options

How-do-you-do TEMP RINSE

Turns on the heater in all postrinse and final rinse cycles to assist prevent spotting on dishware. This option may be turned ON or OFF during the launder cycle.

(on some models)

Howdy TEMP WASH

Energizes the heater to heave h2o temperature in all prewash and master wash fill cycles. Recommended for use with heavily soiled dishes. Option may be turned ON or OFF during the launder cycle.

HEATED Dry OFF

Shuts off the drying heat pick. Dishes air dry naturally and energy is saved.

HEATED DRY ON

Turns the heater on for fast drying. This cycle will extend the time to your wash cycle past xxx minutes.

NOTE: Cannot be selected with RINSE ONLY cycle.

LOCK (on some models)

When the LOCK pad is touched twice within three seconds, all pads become inoperative. You lot can lock the controls toprevent whatever selections from being made. Or you can lock the controls later y'all have started a bike or selected

DELAY First so the cycle or DELAY START is not interrupted. Children cannot accidentally start dishwasher past touching pads with this option selected. To unlock the dishwasher after information technology has been locked, touch the LOCK pad twice within iii seconds. The light above the LOCK pad will turn off.

DELAY HOURS

You can delay the start of a wash wheel for upward to 8 hours. Press the DELAY HOURS pad to choose the (on some models) number of hours you want to delay the get-go of the wheel, so press START/RESET. The machine will count down and start automatically at the correct time. Pressing Outset/RESET a second time will cancel the DELAY HOURS selection. NOTE: If you forget to fully shut the door, a reminder signal will beep until you lot practice so.

RESET (on some models)

To change a wheel after washing starts, touch the START/RESET pad to abolish the bike. Subsequently water is pumped out and the motor stops, yous tin can reprogram and restart the dishwasher. This will accept approximately xc seconds.

three.Commencement (Models with a Dial)

Slowly turn the Dial to the Get-go or ON position, or the selected bicycle. Don't turn it by the Outset, ON or cycle position, or you could accidentally miss a rinse. There is a time delay between start-up and water fill up then you lot will not hear any wash action right abroad.

■Latch the door to brainstorm the wheel.

Showtime (Models without a Dial) Shut and latch the door. Bear on the START/RESET pad to brainstorm the cycle. H2o make full begins and approximately sixty seconds later the wash action begins.

NOTE: The dishwasher remembers your final bicycle so y'all don't take to reprogram each time. When the dishwasher is loaded and the door latch is in the locked position, the command panel lights will be ON and display the concluding settings y'all selected.

If you don't want to change any of the settings, simply touch the START/RESET pad to brainstorm the bike.

Besides, if a power failure occurs, NORMAL and HEATED Dry will automatically exist programmed. Make any new selections and touch the START/RESET pad to begin the cycle.

4.Clean (Model GSD3900 simply)

This low-cal is illuminated when a wash wheel is complete. The light will stay ON until the door is opened.

Rinse Simply

For rinsing partial loads that volition be washed later. Do not use detergent.

ane.Make sure HEATED DRY is not selected.

two.Slowly turn the Dial to RINSE ONLY.

3.Be certain the door is unlatched.

4.Latch the door to start the cycle.

Plate Warmer or Drying

For warming clean dishes and serving plates. This bicycle will have approximately 32 minutes.

1.Load make clean dishware to be warmed.

ii.Select HEATED Dry out ON.

3.Exist sure the door is unlatched.

4.Slowly plow the Dial to PLATE WARMER or DRYING.

v.Latch the door to offset the cycle.

Hot Kickoff or Hot Prestart Choice

Preheats launder water to the correct temperature.

ane.Select the HOT Beginning or HOT PRESTART cycle and any other option on the push button pad.

2.Be sure the door is unlatched.

3.Slowly turn the Dial to HOT Get-go or HOT PRESTART.

iv.Latch the door to start the cycle.

Short Wash or Light Wash or H2o Saver

For quickly washing loads of everyday dishes with light to medium soils that have not dried on.

1.Be sure the door is unlatched.

two.Slowly plough the Dial to SHORT WASH, Lite WASH or H2o SAVER.

3.Latch the door to starting time the cycle.

Start Delay (on some models)

The Kickoff DELAY volition permit y'all to delay the start time of any cycle not on the Dial automatically for upwardly to either 5 or 6 hours (depending on model).

1.Be certain the door is unlatched.

two.Select the launder cycle and option you want.

3.Slowly plow the Dial to the desired fourth dimension. The Wheel ON light will come on.

4.Latch the door to showtime the cycle.

Heavy or Normal

1.Be sure the door is unlatched.

ii.Select any options.

3.Slowly turn the Dial to the bike yous want. Don't turn past this position or you could accidentally miss a rinse.

4.Latch the door to start the cycle.

Using the Dishwasher Door (model GSD3900 only)

1.The door must be airtight and locked into place to select a LOAD Pick or an Selection.

2.If the door is opened during a bicycle and left open, the dishwasher will beep once every minute until the door is closed and latched into place.

Using the dishwasher.

Cheque the H2o Temperature

The inbound water must be at to the lowest degree 120°F and not more than 150°F, for constructive cleaning and to prevent dish harm. Check the water temperature with a candy or meat thermometer. Turn on the hotwater faucet nearest the dishwasher, place the thermometer in a glass and allow the h2o run continuously into the drinking glass until the temperature stops rise.

Use Jet-Dry ® Rinse Amanuensis

Jet-Dry out® or Cascade Crystal Articulate® rinse agents remove spots and prevent new moving picture buildup on your dishes, glasses, flatware, cookware and plastic

Filling the Dispenser

Fill up the rinse amanuensis dispenser until it reaches the bottom of lip inside the opening. Supercede cap. To cheque if rinse agent is needed, remove the cap and await into the dispenser. A total dispenser should last about one month. If rinse agent spills, wipe upward the backlog.

Loading the dishwasher racks

For best dishwashing results, follow these loading guidelines. Features and advent of racks and silverware baskets may vary from your model.

Upper Rack

The upper rack is for glasses, cups and saucers. Cups and glasses fit best along the sides. This is also a secure identify for dishwasher-rubber plastics. The upper rack is good for all kinds of odd-shaped utensils. Saucepans, mixing bowls and other items should be placed face down.

Secure larger dishwasher-safety plastics over ii fingers when possible. Brand sure small-scale plastic items are secure so they tin't fall onto the heating element.

Launder Tower

Keep the center area clear in the lower rack. The wash tower rises through the center of the lower rack during the launder and rinse portions of the wheel.

Don't block it or load tall things next to information technology. As well, be conscientious non to allow a portion of an item such as a pot or dish handle extend through the bottom rack. This could block the wash arm and cause poor washing results.

Lower Rack

When loading the lower rack, do not load large platters or trays in the front right corner. They may prevent detergent from circulating during the wash cycle.

The lower rack is all-time used for plates, saucers and cookware. Large items such as broiler pans and racks should go along the sides. Load platters, pots and bowls forth the sides, in corners or in the dorsum. The soiled side of items should face the eye of the rack. Be sure items don't fall through rack and cake rotation of the spray arm.

Silverware Handbasket

Put flatware in the removable basket with fork and knife handles upwardly to protect your hands. Place spoons in the basket with handles downwards. Mix knives, forks and spoons so they don't nest together. Distribute evenly. Small plastic items, such equally measuring spoons and lids from small containers, should go in the bottom of the silverware basket with silverware on top.

Caring for the dishwasher

To make clean the control panel, use a lightly dampened cloth, then dry out thoroughly. To clean the exterior, use a good appliance shine. Never use sharp objects, scouring pads or harsh cleaners on any function of the dishwasher.

Protect Against Freezing

If your dishwasher is left in an unheated identify during the winter, ask a service technician to:

i.Cut off electric power to the dishwasher. Remove fuses or trip circuit breaker.

two.Turn off the water supply and disconnect the h2o inlet line from the h2o valve.

3.Bleed water from the inlet line and water valve. (Utilise a pan to catch the water.)

4.Reconnect the water inlet line to the water valve.

five.Remove the plastic sump cover in the tub bottom and use a sponge to soak up water in the safety boot.

Does Your Dishwasher Have an Air Gap?

An air gap protects your dishwasher against water bankroll up into it if a drain clogs. The air gap is not a part of the dishwasher. It is not covered by your warranty. Not all plumbing codes require air gaps, then you lot may not have ane.

The air gap is easy to make clean.

Plow off the dishwasher and lift off the chrome cover.

Unscrew the plastic cap and make clean with a toothpick.

Stainless Steel Panels

The stainless steel panels tin can be cleaned with Stainless Steel Magic or a similar product using a clean, soft textile.

GEDishwasherTroubleshooting Tips

Dishwasher won't run

Fuse is diddled, or the circuit breaker tripped:

•Replace fuse or reset circuit breaker. Remove any other appliancesfrom the circuit

• Endeavour resetting the START/RESET pad

Power is turned off:

• In some installations, power to the dishwasher is provided through a wall switch, often located next to the disposer switch. Make certain it is on.

Racket

Some of the sounds yous'll hear are normal:

• Soft food disposal shredding action.

•Bleed valve opening to pump water out.

• Timer control every bit bicycle progresses.

•Detergent cup opening.

• The motor stopping during the drying menses.

•Water draining out of tub immediately afterwards touching the Starting time/RESET pad.

Utensils are not secure in rack or something minor has dropped into rack:

•Make sure everything is secured in dishwasher.

Rattling dishes whenthe spray arm rotates:

•Make sure dishes are properly loaded. Come across the Loading thedishwasher racks section.

Motor hums:

•Dishwasher has not been used on a regular ground. If you do not use your dishwasher often, prepare information technology to fill up and pump out one time every week. This volition assistance keep the seal moist.

Water continuing in the lesser of the tub

This is normal:

•A small amount of clean water around the outlet on the tub bottomat the back of the tub keeps the water seal lubricated.

Water won't pump out of the tub

Drain is clogged:

• If y'all have an air gap, clean information technology.

•Check to see if your kitchen sink is draining well. If not, you may need a plumber.

• If the dishwasher drains into a disposer, run disposer articulate

Suds in the tub

Correct detergent wasn't used:

•Utilise only automatic dishwasher detergents to avoid sudsing.Cascade®, Pour® Complete and Electrasol® Automatic Dishwashing Detergents take been approved for use in all GE dishwashers.

• To remove suds from the tub, open the dishwasher and let suds dissipate. Add 1 gallon of cold water to the tub. On Models with a Dial: Shut and latch the dishwasher. Pump out water by slowly turning the Dial until a drain period is reached. Repeat if necessary. On Models with Electronic Control: Pump out h2o by pressing the Showtime/RESET pad, then ten seconds afterwards, press START/RESET pad over again. Repeat if necessary.

Rinse agent was spilled:

•E'er wipe up rinse agent spills immediately.

Stained tub interior

Some tomato-based foods tin can crusade reddish stains:

•Use of the RINSE Merely cycle after adding the dish to the loadcan decrease the level of staining. GE recommends Cascade® Plastic Booster to help remove these types of stains.

Tea or java stains:

•Remove the stain past hand, using a solution of 1/2 loving cup bleach and 3 cups warm water.

WARNING Earlier cleaning interior, await at to the lowest degree xx minutes afterward a cycle for the heating elements to absurd down. Failure to practice and then can issue in burns.

An overall yellow orbrown film can becaused by iron deposits in water:

•A special filter in the water supply line is the but mode to right this trouble. Contact a water softener company.

White film on inside surface—hard waterminerals:

•GE recommends Jet-Dry ® or Cascade Crystal Clear® to helpprevent hard water mineral deposits from forming.

•Run dishwasher with citric acid to remove mineral deposits. Citric acid (Function number: WD35X151) can be ordered through GE Parts. Run into back cover for ordering data.

Dishes don't dry

Low inlet water temperature:

•Make sure inlet water temperature is at least 120°F.

• Select HEATED Dry.

•Use HOT Offset and ADDED HEAT options.

• Select a college cycle, such as POTS & PANS or HEAVY WASH.

Rinse agent dispenser is empty:

•Bank check the rinse agent dispenser and make full as required.

Dishes and flatware non make clean

Inlet water temperature is below 120°F:

•Raise the water heater temperature to 120°F.

•Utilise HOT START, POTS & PANS or HEAVY WASH and HI TEMP WASH.

Besides little detergent:

• See Using the dishwasher section, refer to Proper Use of Detergent for detergent recommendations.

Old or damp powdereddetergent:

• See Using the dishwasher department, refer to Proper Use of Detergent fordetergent recommendations.

Water pressure is temporarily low:

• Plow on a faucet. Is h2o coming out more than slowly than usual? If so,wait until pressure is normal before using your dishwasher

Air gap is clogged:

•Clean the air gap.

Improper rack loading No air gap or highdrain loop:

•Make sure big dishware does non block detergent dispenser or wash arm

•Verify that you take an air gap or a high drain loop. Refer tothe Installation Instructions

Spots and filming on glasses and flatware

Extremely difficult waterLow inlet water temperature Overloading the dishwasher Improper loading Onetime or damp powder detergent Rinse agent dispenser empty As well little detergent:

•Utilise Jet-Dry® or Cascade Crystal Clear® rinse agents to remove spots and prevent new film buildup.

• To remove stubborn spots and pre-existing motion-picture show from glassware:

1 Remove all metal utensils from the dishwasher.

two Practise non add detergent.

3 Select the longest bicycle.

4 Starting time the dishwasher and allow to run for 18 to 22 minutes. Dishwasher will at present be in the chief launder.

five Open the door and pour ii cups (500 ml) of white vinegar into the bottom of the dishwasher.

6 Shut the door and allow to complete the bicycle. If vinegar rinse doesn't work: Repeat every bit above, except employ 1/4 cup (sixty ml) of citric acid crystals instead of vinegar.

Cloudiness on glassware

Combination of soft water and also much detergent:

• This is called etching and is permanent. To forbid this fromhappening, use less detergent if you have soft water. Wash glassware inthe shortest cycle that volition get them clean.

Water temperature inbound the dishwasher exceeds 150°F:

• Lower the water heater temperature.

Detergent cup chapeau won't latch

Dial is not in the OFF position:

• Turn the Timer Dial to OFF

Detergent left in dispenser cups

Dishes are blocking the detergent cups:

•Reposition the dishes

Steam

This is normal:

• Steam comes through the vent past the door latch during drying and when water is being pumped out.

Black or grayness marks on dishes

Aluminum utensils have rubbed against dishes:

•Remove marks with a mild, abrasive cleaner.

Control panel lights go off when you lot are setting controls

Time too long between touching or selecting pads:

• Each pad must be touched within xxx seconds of the others. To relight, affect whatsoever pad again or unlock and relatch the door

Command panelresponded to inputs just dishwasher neverfilled with water

Door latch may notbe properly seated:

•Call for service

Ask me about:

• Ge Dishwasher Control Setting
• Ge Dishwasher Troubleshooting
• Ge Dishwasher Manuals
• Ge Dishwasher Repair Service

You must sign in to utilize this section.

Source: https://www.tepte.com/article-62.html

Posted by: billmanhund1968.blogspot.com

Share this post